Sachiya Pipe Fittings

    SS 304L Threaded Forged Fittings Sachiya Steel International  is one of the pioneer Manufacture and Exporter of  SS 304L Threaded Forged Fittings , which can be easily welded and processed by standard shop fabrication practices. The austenitic structure of  Stainless Steel 304L Threaded Forged Elbow  also gives this grade excellent toughness, even down to cryogenic temperatures.  Stainless Steel 304L Threaded Forged Tee  does not perform well in more highly reducing environments such as those containing chlorides and sulphuric acid. Stainless Steel 304L Threaded Forged Cross  performs well in fresh water service with low levels of chlorides, whereas at higher chloride levels the grade is susceptible to crevice corrosion and pitting. Working temperatures of 1652 Degree F – 2102 Degree F (750 Degree C – 1150 Degree C) in Stainless Steel 304L Threaded Forged Cap are recommended for most hot working processes. The best machining results in St...

  SS 304 Threaded Forged Fittings Sachiya Steel International  is one of the well-known Manufacture and Exporter of  SS 304 Threaded Forged Fittings  , which provides a combination of corrosion resistance and strength not found in any other commercial material available in its price range. Components of  Stainless Steel 304 Forged Threaded Elbow  using the combination of excellent corrosion restainless-steel-304-threaded-forged-fittings-supplier-exportersistance and high strength currently include pumps, valves and fittings, fasteners, cables. Stainless Steel 304 Forged Threaded Tee  has corrosion resistance greater than that provided by Types 316 and 316L, plus approximately twice the yield strength at room temperature. The additions of Silicon and Manganese have given Stainless Steel 304 Forged Threaded Cross a matrix to inhibit wear, galling, and fretting even in the annealed condition. Higher strengths of  Stainless Steel 304 Forged Threaded C...

    C45 Carbon Steel Plates Sachiya Steel International  is a recognized Manufacture, Supplier and Stockist of  C45 Carbon Steel Plates , which is also used in domestic, professional or industrial areas. The alloying elements in C45 Carbon Steel Plates tend to form either solid solutions or compounds or carbides, where these alloying elements also have an effect on the eutectoid temperature of the steel. Manganese and nickel in SC 45 Carbon Steel Coils lower the eutectoid temperature and are known as austenite stabilizing elements. With enough of these elements the austenitic structure of  C45 Carbon Steel Slating Coils  may be obtained at room temperature. Ganpat Industrial Corporation is one of the well – known for high quality of SC 45 Carbon Steel Perforated Coils, which covers nominal wall and minimum wall seamless ferrite steel pipe intended for high temperature service. Carbide – forming elements in  C45 CS Plates  raise the eutectoid tempe...

  Cupro Nickel 70 Channel Sachiya Steel International  is a known manufacturer and exporter of  Cupro Nickel 70 Channel Other Products , which offers excellent corrosion resistance, especially in marine saltwater environments. For the sake of accuracy, Cupro Nickel 70 / 30 Angle are presented in bold type in the units in which it was originally published with the lighter type equivalents in corresponding units. Cold Working  Cu-Ni 70 / 30 Chain  ( UNS C71500 ) has good cold working capacity, where a typical mix is 75 % copper, 25 % nickel, and a trace amount of manganese. Handy architects utilize the finest quality material and propelled methods to fabricate  Cupro Nickel 70 / 30 C-Channel   at industry standards. Cupro Nickel 70 Channel | Cupro Nickel 70 Channel | Cupro Nickel 70 Channel | Cupro Nickel 70 Channel | Cupro Nickel 70 Channel | Cupro Nickel 70 Channel | Cupro Nickel 70 Channel | Cupro Nickel 70 Channel | Cupro Nickel 70 Channel | Cup...

  Titanium Gr 5 Channel Manufacture Sachiya Steel International  is a known manufacturer and exporter of  Titanium Gr 5 Channel Other Products , which can be machined using slow speeds and high feed rates. Design of experimental technique in  Titanium Grade 5 Angle , that is, response surface methodology (RSM), has been used to accomplish the objective of the experimental study. Wrought  Titanium Grade 5 C-Channel  is used in aerospace, medical, and other applications where moderate strength, good strength to weight, and favorable corrosion properties are required. Titanium Grade 5 Chain is the most widely used titanium alloy of the alpha – plus – beta class, and is also the most common of all titanium alloys. We export a wide assortment of  Titanium Grade 5 I-Beam  that is suitable for applications like static and rotating gas turbine engine components. The addition of 0.05 % palladium, 0.1 % ruthenium or 0.05 % palladium and 0.5 % nickel in...

  Titanium Gr 2 Angle Manufacture  Sachiya Steel International  is a known manufacturer and exporter of  Titanium Gr 2 Angle Other Products , which is stronger than Grade 1 and equally corrosion – resistant against most applications.  Titanium Grade 2 Angle  is least used of the commercially pure titanium grades, but that does not make it any less valuable.  Titanium Grade 2 C-Channel   can also be easily machined, hot worked and welded, where hot working should be performed between 400 Degree F and 600 Degree F. Titanium Grade 2 Chain is not heat treatable, and is used for condensers & heat exchangers.  Titanium Grade 2 I-Beam   is an alpha – beta alloy, which has better response than Ti Grade 5 when heat treating to high strength levels. The oxide scale of Titanium Grade 2 H-Beam, in turn, presents a very good protective layer, preventing bulk from oxidation. The oxidized layer of Titanium Grade 2 T-Beam provides a better prot...